Quiz 1 of 0

CCNA (200-301) Practice Exam #1

Anastasia-Instructor September 3, 2022

Time limit: 0

Quiz Summary

0 of 51 Questions completed

Questions:

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 51 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Match the commands with the respective purpose.

Sort elements

show interfaces [type number]
ip address [address mask]
interface [type number]
show ip interface brief

Lists a large set of informational messages about each interface, or about the one specifically listed interface.

Interface subcommand that sets the router’s IPv4 address and mask.

Global command that moves the user into configuration mode of the named interface.

Lists a single line of information about each interface, including the IP address, line and protocol status, and the method with which the address was configured.

Correct

Incorrect

Question 19 of 51

19. Question
A Layer 2 switch examines a frame’s destination MAC address and forwards that frame out of the port G0/2. That action occurs as part of which plane of the switch?
- Data plane
- Management plane
- Control plane
- None of the above
Correct

Incorrect
Question 20 of 51

20. Question
The _________ plane includes protocols that allow network engineers to manage the devices.
- Data
- Control
- Management
- Network
Correct

Incorrect
Question 21 of 51

21. Question
One of the benefits of controller-based networks over traditional networks is that the configuration on the devices have fewer errors, and you spent less time troubleshooting the network.
- True
- False
Correct

Incorrect
Question 22 of 51

22. Question
Which of the following network design architectures connects a link between each pair of nodes?
- Star
- Hybrid
- Full Mesh
- Partial Mesh
Correct

Incorrect
Question 23 of 51

23. Question
Match the terms that describe the roles of campus switches with the respective description.
Sort elements
- Access
- Distribution
- Core
- Provides a connection point for end-user devices
- Provides an aggregation point for access switches
- Aggregates distribution switches in very large campus LANs
Correct

Incorrect
Question 24 of 51

24. Question
With PoE, a LAN switch can act as the Power Sourcing Equipment (PSE).
- True
- False
Correct

Incorrect
Question 25 of 51

25. Question
A routing protocol is a set of rules, and algorithms used by routers for the overall purpose of learning routes whereas a routed protocol is a protocol that defines a packet structure and logical addressing, allowing routers to forward or route the packets.
- True
- False
Correct

Incorrect
Question 26 of 51

26. Question
Type next to each route type the default Administrative Distances (AD).
- IGRP
  
  Connected
  
  OSPF
  
  Static
Correct

Incorrect
Question 27 of 51

27. Question
In a spoofing attack, which of the following parameters are commonly spoofed? (Choose two answers)
- Source IP address
- MAC address
- Routing table
- Destination IP address
- ARP table
Correct

Incorrect
Question 28 of 51

28. Question
Which of the following attacks typically function by overwhelming or flooding a targeted machine with requests until normal traffic is unable to be processed, resulting in denial-of-service to additional users?
- DoS
- Spoofing
- Reconnaissance
- Phishing
Correct

Incorrect
Question 29 of 51

29. Question
In a reflection attack, the source IP address in the attack packets is spoofed so that it contains the address of the victim.
- True
- False
Correct

Incorrect
Question 30 of 51

30. Question
Match the Protocols with TCP/IP Architecture Layers
Sort elements
- HTTP, SMTP, POP3
- TCP, UDP
- IP, ICMP
- Ethernet, 802.11
- Application
- Transport
- Internet
- Data Link & Physical
Correct

Incorrect
Question 31 of 51

31. Question
Sort the TCP/IP Networking Model with the right order from top to bottom:
- Network
- Data Link
- Application
- Physical
- Transport
View Answers:
Correct

Incorrect
Question 32 of 51

32. Question
Answer the following fill-in-the-blank question:
- and are the two most commonly used TCP/IP transport layer protocols.
Correct

Incorrect
Question 33 of 51

33. Question
Which of the following commands identify switch interfaces as being trunking interfaces that currently operate as VLAN trunks? (Choose two answers)
- show interfaces
- show interfaces switchport
- show interfaces trunk
- show trunks
- show vlan
Correct

Incorrect
Question 34 of 51

34. Question
One of the most common reasons for choosing to create smaller broadcast domains (VLANs) is to reduce CPU overhead on each device, improving host performance, by reducing the number of devices that receive each broadcast frame.
- True
- False
Correct

Incorrect
Question 35 of 51

35. Question
Which of the following options can be used to provide wireless connectivity to a non-wireless device?
- Wireless repeater
- Workgroup bridge
- Transparent bridge
- Adaptive bridge
Correct

Incorrect
Question 36 of 51

36. Question
Type the frequency band that commonly used for Wi-Fi. (Type only the number)
- Wi-Fi commonly uses the 2.4GHz and GHz bands.
Correct

Incorrect
Question 37 of 51

37. Question
Type the configuration command that defines the password that all users must use to reach enable mode. The password should be “examsdigest” and should be encrypted.
Correct

Incorrect
Question 38 of 51

38. Question
Which of the following is the prefix for address 1000:0000:0000:0001:0000:0000:0000:0000, assuming a mask of /64?
- 1000::1::/64
- 1000::1:10:0:0:0/64
- 2000:0:0:1::/64
- 1000:0:0:1::/64
Correct

Incorrect
Question 39 of 51

39. Question
Type the wildcard mask that matches all IP packets in the subnet 46.45.44.0, and mask 255.255.255.0.
- . . .
Correct

Incorrect
Question 40 of 51

40. Question
Examine the following show command output on a router configured for dynamic NAT:

— Inside Source
access-list 1 pool examsdigest
pool examsdigest: netmask 255.255.255.240
start 190.1.1.1 end 190.1.1.10
type generic, total addresses 10, allocated 10 (100%), misses 595

You are responsible to find out why users are not being able to reach the Internet.
- The cause is not related to dynamic NAT
- The command output does not provide any clue to identify the problem
- Dynamic NAT can't use Standard ACLs
- The NAT pool does not have enough entries to fulfill the user's requests
Correct

Incorrect
Question 41 of 51

41. Question
Given the diagram below, complete the missing configuration command in order to make the static NAT functional.
- R1# show running-config
  
  ! Lines omitted for brevity!
  
  interface FastEthernet0/0
  ip address 192.168.1.3 255.255.255.0
  ip nat inside
  !
  interface GigabitEthernet0/0
  ip address 190.2.2.21 255.255.255.0
  
  !
  ip nat inside source static 192.168.1.2 200.1.1.2
  ip nat inside source static 192.168.1.1 200.1.1.1
Correct

Incorrect
Question 42 of 51

42. Question
After configuring a working router interface with IP address/mask 10.1.1.100/26, which of the following routes would you expect to see in the output of the show ip route command? (Choose two answers.)
- A connected route for subnet 10.1.1.64 255.255.255.192
- A local route for host 10.1.1.64 255.255.255.255
- A local route for host 10.1.1.100 255.255.255.255
- A local route for host 10.1.1.100 255.255.255.192
- A connected route for subnet 10.1.1.0 255.255.255.0
Correct

Incorrect
Question 43 of 51

43. Question
You are responsible to configure a static route for the network 156.187.45.0/24 using the IP address 156.187.80.45 as the next-hop IP. Type the command to configure the static route.
Correct

Incorrect

Question 44 of 51

44. Question

Match the features of Cisco DNA Center with their purpose.

Sort elements

Encrypted traffic analysis
Device 360 and Client 360
Network time travel
Path trace

Enables Cisco DNA to use algorithms to recognize security threats even in encrypted traffic

Gives a comprehensive view of the health of the device

Shows past client performance in a timeline for comparison to current behavior

Discovers the actual path packets would take from source to destination based on current forwarding tables

Correct

Incorrect

Question 45 of 51

45. Question
Which answer correctly describes the format of the JSON text below? (Choose two answers)

{
“variable1”: { “var” :”1″}
}
- One JSON object that has one key:value pair
- One JSON object that has two key:value pairs
- Two JSON objects that have two key:value pair
- A JSON object whose value is a second JSON object
- A JSON object whose value is a second JSON array
Correct

Incorrect
Question 46 of 51

46. Question
A company uses a Metro Ethernet WAN with an Ethernet LAN (E-LAN) service, with the company headquarters plus 20 remote sites connected to the service. The enterprise uses OSPF at all sites, with one router connected to the service from each site. Which of the following are true about the Layer 3 details most likely used with this service and design? (Choose all that apply)
- The WAN uses one IP subnet.
- The WAN uses 20 or more IP subnets.
- A remote site router would have one OSPF neighbor.
- A remote site router would have 20 OSPF neighbors.
Correct

Incorrect
Question 47 of 51

47. Question
Which of the following protocols or technologies do you use each time you connect remotely through a VPN?
- TLS
- IPsec
- SSH
- FTPS
Correct

Incorrect
Question 48 of 51

48. Question
Given the following OSPF network diagram, what router will be added to R1’s routing table as a next-hop?
- R2
- R4
- R5
- R7
Correct

Incorrect

Question 49 of 51

49. Question

Match the OSPF design terms with the respective descriptions.

Sort elements

Area Border Router (ABR)
Backbone router
Area
Backbone area

An OSPF router with interfaces connected to the backbone area and to at least one other area

A router connected to the backbone area (includes ABRs)

A set of routers and links that shares the same detailed LSDB information, but not with routers in other areas

A special OSPF area to which all other areas must connect—area 0

Correct

Incorrect

Question 50 of 51

50. Question
Type the dotted-decimal notation (DDN) equivalent of /17.
- . . .
Correct

Incorrect
Question 51 of 51

51. Question
Match the dotted-decimal notation (DDN) with the equivalent prefix (CIDR) format.
Sort elements
- /18
- /9
- /11
- /29
- 255.255.192.0
- 255.128.0.0
- 255.224.0.0
- 255.255.255.248
Correct

Incorrect

CCNA (200-301) Practice Exam #1

Anastasia-Instructor September 3, 2022

Quiz Summary

Information

Results

Results

Categories

1. Question

Which of the following answers lists the prefix (CIDR) format equivalent of 255.255.254.0?

2. Question

Type the prefix (CIDR) format equivalent of 255.255.255.240?

/

3. Question

Which of the following answers lists the dotted-decimal notation (DDN) equivalent of /30?

4. Question

Type the command that copies the configuration from RAM into NVRAM

5. Question

Which of the following type of memory is used to store the configuration used by the switch when it is up and running?

6. Question

Given the following URI https://courses.examsdigest.com/ccna, which part is the hostname?

7. Question

Match the applications with their well-known port numbers.

Sort elements

8. Question

Which of the following options are things that a standard IP ACL could be configured to do? (Choose two answers.)

9. Question

Which of the following protocols synchronize the time of different systems?

10. Question

Type the command that states whether the Cisco Discovery Protocol (CDP) is enabled globally.

SW-examsdigest#

11. Question

Which of the following IPv6 addresses is the shortest valid abbreviation for FE80:0000:0000:0100: 0000:0000:0000:0999?

12. Question

Type the shortest valid abbreviation form for the 5000:0400:0030:0006:8000:0800:0010:0002 IPv6 address.

: : : : : : :

13. Question

Which of the following is the unabbreviated version of the IPv6 address 8002:AA3::100:30?

14. Question

Why does the formula for the number of hosts per subnet (2H – 2) require the subtraction of two hosts?

15. Question

Given the following IP addresses, identify which of those are private IP networks? (Choose all that apply.)

16. Question

The senior network engineer of your company, tells you to configure the interfaces of the R1 based on the diagram below.

The subnet mask is 255.255.255.0. Start the configuration with the G0/0, then G0/1 and last S0/0

R1# Enter configuration commands, one per line. End with CNTL/Z. R1(config)# R1(config-if)# R1(config-if)# R1(config-if)# R1(config-if)# R1(config-if)# R1(config-if)# R1(config-if)# R1(config-if)# R1(config-if)# ^Z R1#

17. Question

Type the command that produces the following output.

18. Question

Match the commands with the respective purpose.

Sort elements

19. Question

A Layer 2 switch examines a frame’s destination MAC address and forwards that frame out of the port G0/2. That action occurs as part of which plane of the switch?

20. Question

The _________ plane includes protocols that allow network engineers to manage the devices.

21. Question

One of the benefits of controller-based networks over traditional networks is that the configuration on the devices have fewer errors, and you spent less time troubleshooting the network.

22. Question

Which of the following network design architectures connects a link between each pair of nodes?

23. Question

Match the terms that describe the roles of campus switches with the respective description.

Sort elements

24. Question

With PoE, a LAN switch can act as the Power Sourcing Equipment (PSE).

25. Question

A routing protocol is a set of rules, and algorithms used by routers for the overall purpose of learning routes whereas a routed protocol is a protocol that defines a packet structure and logical addressing, allowing routers to forward or route the packets.

26. Question

Type next to each route type the default Administrative Distances (AD).

IGRP

Connected

OSPF

Static

27. Question

In a spoofing attack, which of the following parameters are commonly spoofed? (Choose two answers)

28. Question

Which of the following attacks typically function by overwhelming or flooding a targeted machine with requests until normal traffic is unable to be processed, resulting in denial-of-service to additional users?

29. Question

In a reflection attack, the source IP address in the attack packets is spoofed so that it contains the address of the victim.

30. Question

Match the Protocols with TCP/IP Architecture Layers

Sort elements

Why does the formula for the number of hosts per subnet (2^H – 2) require the subtraction of two hosts?

The subnet mask is `255.255.255.0`.
Start the configuration with the `G0/0`, then `G0/1` and last `S0/0`

R1#
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#
R1(config-if)#
R1(config-if)#
R1(config-if)#
R1(config-if)#
R1(config-if)#
R1(config-if)#
R1(config-if)#
R1(config-if)#
R1(config-if)# ^Z
R1#

interface FastEthernet0/0
ip address 192.168.1.3 255.255.255.0
ip nat inside
!
interface GigabitEthernet0/0
ip address 190.2.2.21 255.255.255.0

!
ip nat inside source static 192.168.1.2 200.1.1.2
ip nat inside source static 192.168.1.1 200.1.1.1

After configuring a working router interface with IP address/mask 10.1.1.100/26, which of the following routes would you expect to see in the output of the `show ip route` command? (Choose two answers.)